Buying Price for Various Gold Plated CPUs, Chips and Fingers
Price Update 12-23-14
This is a video of chip’s you can run across. Enjoy
Refer to the pictures and pricing below for our current pricelist. This page is updated often, so check back regularly!
There are many more diferent types of material we buy that are not shown.
We also buy other gold, silver and precious metal bearing material’s. If the material you have is not on this list send us an email with picture’s for prices.
There is no minimum order size that we buy.
We pay by Paypal, check & cash.
We also offer the recovery and refining of certain gold bearing material such as: Karat gold, gold filled, gold plated and certain gold bearing electronic parts. For more information on this email us with pictures and description of what you have to process.
If you have any questions please Email us at: atmeltrecycling@aol.com
Mixed Ram- $11.50 /lb.
Tin finger Ram only load- $5.00 /lb.
Slot Processors (cleaned)- $9.50 /lb.
Ceramic Eprom’s- $3.00 /lb.
Large Motarola- $70.00 /lb.
Small Motarola- $105.00 /lb.
Pinless ceramic processor- $4.00 /lb.
Hard drive board’s- $8.00/lb.
Cell phones (no batteries)- $5.00/lb.
Cell phone batteries Li-ion- .30 /lb.
Cell phone boards- $8.00/lb.
Cell phone sim card’s- $20.00 /lb.
Satelite receiver cards (Gold square only)- $20.00 /lb.
Hard drives with boards- .85 /lb.
Hard drives no boards- .10 /lb.
Power supplies with wires- .25 /lb.
Power supplies no wires- .15 /lb.
Gold filled and Karat gold, gold plated prices.
Processed 24K Gold- 94% of Spot
Gold plated jewlery- $6.00 /Lb.
Karat scrap (Clean, small deduction for stones)- 80% of spot
Gold filled jewlery (clean, no stones, metal, springs or trash)- $.40 /g
Gold filled eye glass frames (No plastic, screws or glass) -$.90 /g
Gold filled pocket watch cases. Must be clean and no visable wear or brassing.
10 Year- $.65 /g
20 Year- $.80 /g
25 Year- $.90 /g
| pic here | price | comment |
 High Quality Trimmed Finger Boards |
$50/lb |
Fingers must be closely trimmed , use pic for reference ….. Please deduct % of overage ( extra board still attached ) from price if your fingers are not cleanly cut as shown ….. |
 Pentium Pro |
$13.50 each |
|
 i486 |
$110 / lb |
INTEL 486 CPU’s ( gold caps ) |
 286 / 386 |
$110 / lb |
INTEL 286 and 386 CPU’s ( gold caps ) |
 i960 , Motorolas , LSI , SunGX Gold Bottoms |
$90 / lb |
Motarola, LSI , and Sun GX Gold Bottom CPU |
|
 Misc Gold Cap Chip |
$39.00/ lb |
Any misc gold cap that is not on this list AMD 5 x 86 , etc …. Send pic for reference and price consideration based on makeup ….. |
 AMD no Aluminum |
$31 / lb |
|
 AMD K-6 |
$27 / lb |
|
 Pentium 1 Ceramic |
$33 / lb |
|
 Black fiber |
$31 /lb |
|
 AMD 486 , AMD 5 x 86 |
$60 / lb |
|
 Intel i860 xr |
$100 / lb |
|
 IBM / Cyrix |
$39 / lb |
|
 186 Pinless CPU |
$245.00/ lb |
|
 NEC / Toshiba Pinless |
$50 / lb |
|
 Intel Dbl Gold |
$60 / lb |
|
 Green Fiber CPUs |
$8 / lb$4.50/ lb
|
These will be seperatedFiber CPU’s No heat sink Fiber CPU’s with metal heat sink |
 DLP CPU |
$46 / lb |
|
 Co processors |
$80 / lb |
These are generally found in Telcom applications , soldered to boards , generally are double sided gold , if you have quantities of the smallest types under 3 grams each, inquire for additonal $$$ |
 Medium IC’s 2 – 2.5 ” Length |
$95 / lb |
Must have Gold tops and Full Gold legs , 2.5″ max length |
 Small IC’s 1.5 ” or smaller …. |
$105 / lb |
Must have gold tops and Full Gold legs , 1.5″ max length |
 Gold Plated Whole Boards / Board Only |
$100 – $200 / lb |
Whole Boards / Board Only |
 Wire Wrapped Connectors |
$8 / lb |
|
 Wire Wrapped Pin Board |
$8 / lb |
|
 AMD K5 Double Sided CPU |
$55 / lb |
GoldChipBuyer 
how much do you pay for AMD k6? lets say by pound or by chip.
On the K6’s with aluminu top we are paying $37.00 /lb, that is roughly $1.75 per chip.
thank you, and i forgot to also add ibm 6x86l pr166+ how about those
with gold caps.
Yes the ones with the gold caps.
Our price list one the site shows $48.00 /lb for these IBM 6×86 chips.
sorry i did not see the prices on the site, i was not viewing your full site. i work on alot of old computers that have these chips in them either the ibm 6x86l or the amd k6s. i pull these for scrap now and was looking for a buyer. i receive around 20 to 40 chips a day 10 at the leased, i like to stay busy. i will continue to save these and was wondering how you guys buy, like do i send them to you or do you purchase through ebay. i would like to get rid of em soon as i am running out of space, also wondering what the maximum order you would except
thank you,
Yes we are interested in buying them from you. We ask that you ship them to us and we will check the weight on the material and then we can do a payment by pypal or check. If you will send me an email I will get you our shipping address. atmeltrecycling@aol.com
Thank you
what is the avwrage time it takes to recieve payment through paypal and or check from the day of receiving the items
We try to have paypal done within 24-48 hours of receiving material. 3-5 days to reveive a check. We always get sellers approval of final price before we make payment so that seller is clear in what he is getting paid for the total material load.
Hello, How much are you paying for Nextel sim cards?
For cell phone sim cards and sattelite cards with the gold square cut out we are currently offering $35.00 /lb.
your background picture shows pulled pins. how much for clean gold plated pins? say from either gold plated connector ends or perhaps wire wrap pins which have been removed? thanks
Pin’s can range from 1/2g of gold per lb. to over 5g of gold per lb. We would need to see some pictures sent to our email to give you an esitmate of what they are worth.
I have pulled pins from mil spec boards that I would like refined. How does that work? I also have a frind that has about 60 0r 70 tons of real high yield mostly mil specand medical stuff that he is thinking of shipping overseas. Could you handle that volume?
For the pin’s we make an agreement on the pecentge returns and then you can send them to me to be processed. For the boards email me and we can discuss it. atmeltrecycling@aol.com
What price per pound for sun ultra spark 3 processors?
The Sun Spark processor go in with the pinless ceramic processors at $7.25 /lb..
Do you buy HD platters?
No, you will be better off selling them for scrap aluminum.
new seller here are we still at these prices?
Yes prices are still current and good.
hello,
I am the owner of a Scrap Facility in Orlando. I am interested in selling you my computer scrap. I have gold fingers, and all types of RAM and Chips. Please contact me directly. nathan@megamanmetals.com Thanks.
Email sent.
Price update for 8-6-12.
VIA,Motarola (old price) $48.00 /lb. (new price) $52.00 /lb.
Pentium 1 Ceraimc (old price) $45.00 /lb. (new price) $42.00 /lb.
hi i am from india and i have 2.20 lb approx 1 kg of medium squre IC chip i would like to sold these one so can you please tell me a best price for this IC
Email sent.
Thank You
I have some old computers, hard drive, towers, key boards,and printers wanting to get rid of do you all take them or do you know anyone that does.
Email sent
Thank You
This blog is related to computers which is helpful for PC users. I really thank you for sharing this useful content.
Thank you
can i ask how’s the process of shipping the items to you and the payment??
and do you buy bulk only?
Email sent
Thanks
Email sent
can you tell me more info about this sir.. if i send your my items to you then you will sort and weight it ? right ? but the shipping fee ? for the courier should pay by me ? or you sir ?
Gud Day Sir! I’m from the Philippines and planning to do business in buying electronics and computer scrap. which regards to processors and trimmed finger boards, what is the least quantity you allowed to be shipped?
Thanks!!!!
Manny
do you buy computer mother boards? if so how much do you pay a lb?
I receive your email and I’m sorry formy late response. I’m still looking and buying scrap in our country. Once I have enough I will shipped it to your
hi friend! i sent you an email, do you receive it? i’m Alejandro Ramirez : a_ramirez2000@hotmail.com
Got it and replied to you. Look forward to working with you.
Hello I’am from Turkey.I want to buy lots of intel pentium pro cpus.Can you ship to Turkey?
Thanks
do you get more if you remove the metal caps on p4 chips
The price will not increase if you take the heat sink off so it is better if you leave them on.
Do you buy trimmed memory and slot processors
Not at this time we don’t. We might in the future tho.
Hello,
Can you please send your location so I can calculate shipping costs.
Thanks
Email sent.
Thanks
gostab ria de saber se vc compra computadores usados?
Compramos computadores inteiros por US $ 3,00-5,00 cada. Mas seria melhor se elas foram quebradas e as peças enviadas para nós.
Hi sent you a package you recived it sent me a e mail back but you made mistakes in my favor sent you a return e mail not sure if yo got it You came up with a total of $55.40 I came up with $52.84 a difference of $2.56. i want to let you know that i want to accept the payment of 52.84 please send it to my paypay civicmining@optonline.net need the mony right away
Thanks for working with us.
Hi
I have some gold connectors and pins. Send me an e-mail please.
Pictures: http://pokazywarka.pl/po7mqz/
Email sent thanks.
Do you have any idea when I can get a response about the boards that I sent a week or so before Christmas? Hi Marty,
“I am tied up in meetings today. I will have your material completed tonight or early tomorrow. Sorry for the delay in this.
Thanks
Frank”
Prices have been update on the price list for material.
$150.00 /lb is what we are currently offering for the medium IC chip’s that you are asking about.
Yes, if you will look at the price list at the top it shows sattelite cards with the gold sqares only and not the rest of the plastic that we are currently offering $35.00 /lb.